http://www.highdefjunkies.com/showthread.php?7089
Panasonic Plasmas
Power Light Blinking Chart
All Panasonic Plasmas feature a protection circuit that will force the TV to shut down in case of a problem. The malfunctioning part can be identified by the numbers of blinks of the power light.
<<<<<< WARNING - WARNING - WARNING - WARNING - WARNING >>>>>>
Use the following charts as reference material only. Defective boards should be replaced only by trained professional technicians. Misusing or mishandling can result in serious injury and/or permanent damage to the TV. -Neither HighDefJunkies Forum nor I (BruZZi), can or will be held responsible or liable, under any circumstances, for any damages and/or void of warranty resulting from the use of the information posted on these charts.
Panasonic
Consumer Plasmas
2011 Models :
ST30 / GT30 / VT30
Kode: Vælg alt=================================================================================
BLINKS PROBLEM CHECK POINT
=================================================================================
1 blink Panel Info SOS * No Info Given *
LP1 Start SOS
3 blinks P+ 3.3v SOS A-Board
4 blinks Power SOS P Main-Board / P Sub-Board
P-Board / P2-Board
5 blinks P+ 5v SOS A-Board
6 blinks Driver SOS 1 SC-Board / A-SC FPC
SC Energy Recovery Circuit
A-SC FPC DET
7 blinks Driver SOS 2 SU-Board / SD-Board
SU/SD Connector DET
SU/SD Scan and Logic IC
8 blinks Driver SOS 3 SS-Board / SS2-Board / SS FPC / SS2 FPC
SS FPC Detect
SS Energy Recovery Circuit
9 blinks Discharge Control SOS A-Board
10 blinks Sub 5V SOS / Sub 3.3v SOS A-Board / SC-Board / SS-Board / P Main-Board / P Sub-Board
Tuner Power SOS
11 blinks Fan SOS A-Board / Fan
12 blinks Sound SOS A-Board / Speaker / Woofer
13 blinks Emergency SOS A-Board
14 blinks IR LED SOS A-Board
BOARDS DESCRIPTION:
P MAIN Board = Power Supply (VT30 Models) - Non-serviceable. Must be replaced for service.
P SUB Board = Power Supply (VT30 Models) - Non-serviceable. Must be replaced for service.
P Board = Power Supply (All Other Models)
P2 Board = Power Supply (All Other Models)
A Board = Main AV Input / Processing
K Board = Remote Receiver / Power LED / C.A.T.S. Sensor
S Board = Power Switch
V Board = 3D Eyewear Transmitter
C1 Board = Data Driver (Lower Right)
C2 Board = Data Driver (Lower Center)
C3 Board = Data Driver (Lower Left)
SC Board = Scan Drive
SS Board = Sustain Drive
SS2 Board = Sustain Out (Lower)
SU Board = Scan Out (Upper) - Non serviceable. Must be replaced for service.
SD Board = Scan Out (Lower) - Non serviceable. Must be replaced for service.
2010 Models :
X24 / C2 / U2 / S2 / G20 / G25 / VT20 / VT25
Kode: Vælg alt=================================================================================
BLINKS PROBLEM CHECK POINT
=================================================================================
2 blinks 15v SOS D-Board / P-Board
3 blinks 3.3v SOS D-Board
4 blinks Power SOS P-Board
5 blinks 5v SOS D-Board
6 blinks Driver SOS 1 SC-Board / D-SC FPC
SC Energy Recovery Circuit
D-SC FPC DET
7 blinks Driver SOS 2 SU-Board / SD-Board
SU/SD Connector DET
SU/SD Scan and Logic IC
8 blinks Driver SOS 3 SS-Board / SS2-Board
SS FPC Detect
SS Energy Recovery Circuit
9 blinks Discharge Control SOS D-Board
10 blinks Sub 5V SOS / Sub 3.3v SOS A-Board / SC-Board / SS-Board / P-Board
Sub 9V SOS / Tuner Power SOS
MIHO 3.3 SOS / LED 8v SOS
11 blinks Fan SOS A-Board / Fan
12 blinks Sound SOS A-Board / Speaker
2009 Models :
TC-P54Z1
2009 Models :
PX14 / PS14 / C1 / U1 / X1 / S1 / G10 / G15 / V10
Kode: Vælg alt=================================================================================
BLINKS PROBLEM CHECK POINT
=================================================================================
1 blink STB 5v SENSE Time Out A-Board
2 blinks 15v SOS A-Board
3 blinks 3.3v SOS A-Board
4 blinks Power SOS P-Board
5 blinks 5v SOS A-Board
6 blinks Driver SOS 1 SU-Board / SD-Board / SC-Board / SS-Board
(SC/SS Energy Recovery Circuit)
7 blinks Driver SOS 2 SU-Board / SD-Board / SC-Board
(SC Floating Voltage Area)
8 blinks Driver SOS 3 SS-Board / SS2-Board
(SS FPC/ DET)
9 blinks Communication Error between A-Board
Panel-MPU and SYS-MPU
10 blinks Sub 5V SOS / Main 3.3v SOS A-Board
DTV 9V SOS / Tuner Power SOS
11 blinks Fan SOS A-Board
13 blinks Communication Error A-Board
with IC8001
2008 Models :
PX80U / PZ80U / PZ85U / PZ800U / PZ850U
Kode: Vælg alt=================================================================================
BLINKS PROBLEM CHECK POINT
=================================================================================
1 blink STB 5v SENSE time out A-Board
2 blinks 15v SOS D-Board
3 blinks 3.3v SOS A-Board
4 blinks Power SOS P-Board
5 blinks 5v SOS D-Board
6 blinks Driver SOS 1 SU-Board / SD-Board / SC-Board
(SC Energy Recovery Circuit)
7 blinks Driver SOS 2 SU-Board / SD-Board / SC-Board
(SC Floating Voltage Area)
8 blinks Driver SOS 3 SS-Board / SS2-Board
(SS Energy Recovery Circuit)
9 blinks Communication Error between A-Board / D-Board
Panel-MPU and SYS-MPU
10 blinks Sub 5v SOS / Main 3.3v SOS A-Board
DTV 9v SOS / Tuner Power SOS
11 blinks Fan SOS PB-Board
12 blinks Sound SOS A-Board
13 blinks Communication Error A-Board
with IC8001 (Pesks PRO)
2007 Models :
PE77U / PX75U / PX77U / PZ77U / PZ700U / PZ750U
Kode: Vælg alt=================================================================================
BLINKS PROBLEM CHECK POINT
=================================================================================
1 blink STB 5v SENSE Time Out DG-Board
2 blinks 15v SOS D-Board
3 blinks 3.3v SOS D-Board
4 blinks Power SOS P-Board
5 blinks 5v SOS D-Board
6 blinks Driver SOS 1 SU-Board / SD-Board / SC-Board
(SC Energy Recovery Circuit)
7 blinks Driver SOS 2 SU-Board / SD-Board / SC-Board
(SC Floating Voltage Area)
8 blinks Driver SOS 3 SS-Board
SS Energy Recovery Circuit
9 blinks Panel Config SOS
10 blinks Sub 5v SOS / Main 3.3v SOS DG-Board
DTV 9v SOS / Tuner Power SOS
11 blinks Fan SOS PB-Board
12 blinks Sound SOS H-Board
13 blinks Communication Error with DG-Board
IC8001 (Pesks Lite 2)
2006 Models :
PD60U / PX6U / PX60U / PX600U
Kode: Vælg alt=================================================================================
BLINKS PROBLEM CHECK POINT
=================================================================================
2 blinks 15v SOS D-Board
3 blinks 3.3v SOS D-Board
4 blinks Power SOS P-Board
5 blinks 5v SOS D-Board
6 blinks Driver SOS 1 SU-Board / SD-Board / SC-Board
(SC Energy Recovery Circuit)
7 blinks Driver SOS 2 SU-Board / SD-Board / SC-Board
(SC Floating Voltage Area)
8 blinks Driver SOS 3 SS-Board
(SS Energy Recovery Circuit)
9 blinks Panel Status
10 blinks PA SOS / Tuner SOS PA-Board / H-Board
11 blinks Fan SOS Fan
12 blinks Sound SOS PA-Board
Boards Decription:
